Ferrofluid fountain
DEATH MAGNET moves ferrofluid
Online since: 21/07/2020,
Number of visits: 112176
1
As part of a workshop at grammar school, Mr Eppel was assigned the task of developing an interactive display for a permanent exhibition illustrating physical processes.
Inspired by ferrofluid sculptures, he decided on a project using ferrofluid.
An interactive ferrofluid fountain came into being, which perfectly demonstrates the characteristics of this fascinating liquid.
This ferrofluid fountain has been on display at the Röntgen Grammar School (Röntgen-Gymnasium) since 2016 and can be viewed on the ground floor.
The centrepiece of this ferrofluid fountain is a small lifting platform (also called lab jack) which can be used to manoeuver a DEATH MAGNET
with an unbelievable adhesive force of 100 kg towards the ferrofluid.
Mr Eppel secured the magnet between two acrylic panels, so it doesn’t shift unintentionally.
He bolted one of the two panels directly to the platform of the lab jack.
The DEATH MAGNET took his place on the head of the bolt located in the centre.
Mr Eppel then positioned the second acrylic panel on top of the magnet and connected it to the acrylic bottom panel using 4 threaded screws.
The lifting platform fits into a homemade wooden frame.
To prevent the lifting platform from accidentally toppling over, Mr Eppel bolted it to the bottom of the wooden frame.
An aluminium bowl is located on top of the upper wooden panel and has a threaded bolt attached on the inside.
As a final step and to complete the ferrofluid fountain, Mr Eppel added the ferrofluid
to the aluminium bowl – a total of 32 bottles, each containing 10 ml of ferrofluid.
The bowl with the bolt was only a prototype. Later, Mr Eppel replaced it with a metal cone with tapered thread. He had it specially made for his project at the school's workshop. But the prototype is already quite impressive! The video posted below shows the remarkable shapes the ferrofluid takes on when a magnet is near.
The bowl with the bolt was only a prototype. Later, Mr Eppel replaced it with a metal cone with tapered thread. He had it specially made for his project at the school's workshop. But the prototype is already quite impressive! The video posted below shows the remarkable shapes the ferrofluid takes on when a magnet is near.
Note from the supermagnete team:
An electromagnet can also be used for the ferrofluid fountain, as this YouTube video posted by the University Duisburg-Essen clearly shows. If you are looking for inspiration for other projects using ferrofluid, you will find them on our website under customer projects with ferrofluid.
An electromagnet can also be used for the ferrofluid fountain, as this YouTube video posted by the University Duisburg-Essen clearly shows. If you are looking for inspiration for other projects using ferrofluid, you will find them on our website under customer projects with ferrofluid.
Articles used
Load...
magnetic fluid for experiments, in PET bottle with pipette
| 1 pc. | 13,54 EUR ea.* (1354,00EUR/litre) | |
| from | 3 pcs. | 12,49 EUR ea.* (1249,00EUR/litre) |
| from | 10 pcs. | 11,56 EUR ea.* (1156,00EUR/litre) |
Available: 711 pcs.
Block magnet 50,8 x 50,8 x 25,4 mm, holds approx. 100 kg, neodymium, N40, nickel-plated
| 1 pc. | 70,36 EUR ea.* | |
| from | 3 pcs. | 63,75 EUR ea.* |
| from | 10 pcs. | 57,84 EUR ea.* |
| from | 20 pcs. | 54,98 EUR ea.* |
| from | 40 pcs. | 52,43 EUR ea.* |
| Ask for a rebate from 80 pcs. | ||
Available: 380 pcs.
One person likes this customer project
-Projects are bookmarked in your customer account
keywords
The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.
Copying the content or using it elsewhere is not permitted without explicit approval.