Tool for plasterer

A very helpful tool for people who work with screws

Author: A. Gaigher, Etoile sur Rhône, France

Online since: 19/10/2011, Number of visits: 363738

I am a drywall builder (in charge of plasterboard and plaster). This is my newest tool: A piece of wood that has a countersunk pot magnet on the top and the bottom - a large CSN-48 and a smaller CSN-16.

Thanks to the strength of CSN-48, this tool clings to a steel beam in the ceiling - even though it is separated by a 13 mm thick plasterboard (BA130).

I just dip the CSN-16 into a box with screws and many of them cling to the magnet.

Both applications are commonly known and not all that innovative. But wait, it gets better...

Once the plasterboard it mounted over the steel beam, it is practically impossible to find the metal again and put screws into it. That's where my tool comes in handy! The CSN-48 finds the metal easily and you can just let it hang there upside down. The CSN-16 holds a nice stockpile of screws within reach that you can use to screw the plasterboard onto the steel beam.

That saves a lot of time and the painter doesn't have to paint over marks on the plasterboard.

Thanks a lot, supermagnete!

Articles used

CSN-16

neodymium pot magnet Ø 16 mm with countersunk hole, holds approx. 4 kg,

	5 pcs.	1,94 EUR ea.*
from	15 pcs.	1,69 EUR ea.*
from	40 pcs.	1,50 EUR ea.*
from	80 pcs.	1,39 EUR ea.*
Ask for a rebate from 350 pcs.

Available: 270 020 pcs.

CSN-48

neodymium pot magnet Ø 48 mm with countersunk hole, holds approx. 87 kg,

	1 pc.	13,12 EUR ea.*
from	3 pcs.	11,72 EUR ea.*
from	10 pcs.	10,37 EUR ea.*
from	20 pcs.	9,64 EUR ea.*
from	40 pcs.	8,81 EUR ea.*
Ask for a rebate from 450 pcs.

Available: 15 063 pcs.

ZTN-16

neodymium pot magnet Ø 16 mm with counterbore hole, holds approx. 4 kg,

	5 pcs.	1,84 EUR ea.*
from	15 pcs.	1,59 EUR ea.*
from	40 pcs.	1,42 EUR ea.*
from	80 pcs.	1,30 EUR ea.*
Ask for a rebate from 300 pcs.

Available: 8 410 pcs.

ZTN-48

neodymium pot magnet Ø 48 mm with counterbore hole, holds approx. 63 kg,

	1 pc.	12,40 EUR ea.*
from	3 pcs.	10,99 EUR ea.*
from	10 pcs.	9,74 EUR ea.*
from	20 pcs.	9,14 EUR ea.*
from	40 pcs.	8,60 EUR ea.*
Ask for a rebate from 120 pcs.

Available: 3 392 pcs.

0 people like this customer project -Projects are bookmarked in your customer account

This might also interest you

3D-printed board magnet

Paper towel holder

Hanging up a power strip

Dropped ceiling with halogen spotlights

keywords

Hobby room ( 35 )
Easy ( 200 )
Professional ( 71 )
Useful ( 234 )
DIY ( 80 )

The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.